The Bear Brook Watershed in Maine: Multi-decadal whole-watershed experimental acidification

The Bear Brook Watershed in Maine (BBWM) is a long-term research site established to study the response of forest ecosystem function to environmental disturbances of chronic acidic deposition and ecosystem nitrogen enrichment. Starting in 1989, the West Bear (treated) watershed received bimonthly applications of ammonium sulfate [(NH₄)₂SO₄] fertilizer from above the canopy, whereas East Bear (reference) received ambient deposition. The treatments were stopped in 2016, marking the beginning of the recovery phase. Research at the site has focused on soils, streams, and vegetation. Here, we describe data collected over three decades at the BBWM—input and stream output nutrient fluxes, quantitative soil pits and soil chemistry, and soil temperature and moisture.     

Meltwater discharge during the Holocene from the Wilkes subglacial basin revealed by beryllium isotope analysis of marine sediments

Understanding Antarctic Ice Sheet dynamics related to global climate change is of scientific and societal interest as the future behaviour of the ice sheet under the currently changing climate is unknown. We present beryllium‐10 (¹⁰Be) analysis of a high‐resolution marine sediment core from the Adélie Basin near the eastern Wilkes Land margin, which is susceptible to marine ice sheet instability due to the low‐lying nature and down‐sloping trough of the Wilkes Subglacial Basin. Combined with a newly constructed age model using compound specific radiocarbon dates, the data reveal three events associated with high meteoric ¹⁰Be at ca. ~10 ka, ca. ~6.5 ka and from ca. ~4 ka. We interpret these high meteoric ¹⁰Be events to be derived from the deposition of ¹⁰Be released from the ice sheet during meltwater discharge. In particular, the shift to higher meteoric ¹⁰Be concentration at~4 ka may correspond to changes in climate patterns at this time. Copyright © 2019 John Wiley & Sons, Ltd.     

乌鲁木齐大气混合层厚度和稳定度与大气污染的关系

利用乌鲁木齐市4座10层100 m梯度气象塔2013年6月~2014年4月气象观测资料和7个环境监测站[WTBX]AQI[WTBZ]资料，计算并分析了大气混合层厚度和稳定度特征，探讨了大气混合层厚度和稳定度与污染的关系。结果表明：乌鲁木齐市混合层厚度夏季郊区高、城区低，冬季从南郊—城区—北郊随地势降低依次降低；夏季和冬季分别在1 559～1 772 m和526～1 156 m之间。地面至2 km以上每500 m高度间隔统计混合层厚度，500～1 000 m出现频率最多；月变化为6～9月基本在500 m以上，且每个高度区间其概率均超过10%，10月～次年2月1 500 m以上区间概率明显减小；日变化为中午13:00～16:00达到最高值，下午和傍晚迅速下降。白天较大的感热输送提供充足的热力条件，这也体现出白天以不稳定层结为主，夜间则以稳定层结为主。大气稳定度分类结果，夏季郊区和城区不稳定（A～C类）所占比例差不多，冬季北郊稳定（E、F类）所占比较最大、城区最弱。[WTBX]AQI指数冬季最大，从南郊—城区—北郊依次增大，这与采暖期污染物多、南郊比北郊地势高有利于扩散输送有关。总体来看，乌鲁木齐大气混合层厚度空间分布与气象要素、大气稳定度、地形等密切相关，对AQI[WTBZ]指数分布有重要影响，这对近地层大气污染状况预报有着重要的指导意义。     

大连市大气污染物质量浓度与气溶胶光学厚度的相关性分析

分别对2015年6~12月和2016年6~12月大连地区的大气污染物PM2.5、PM10、SO₂、NO₂、CO和O₃的浓度数据进行数据统计分析,基于ENVI软件平台利用MODIS数据反演大连地区的气溶胶光学厚度,通过回归建模研究气溶胶光学厚度与大连地区10个地面监测站点的大气污染物PM2.5、PM10、SO₂、NO₂、CO和O₃的浓度数据的相关性。回归建模以气溶胶光学厚度（AOD）为自变量,以大气污染物PM2.5、PM10、SO₂、NO₂、CO和O₃为因变量,在SPSS软件中分别选取线性、对数、三次、乘幂、指数5种函数类型进行研究,通过对比回归模型的拟合优度R²,选择最优拟合模型,探讨利用遥感数据反演气溶胶光学厚度监测大气污染的相关性。结果表明：气溶胶光学厚度与NO₂、PM2.5和PM10的最优拟合模型均为三次模型,其拟合优度R²分别是0.685、0.801和0.845;与O₃和SO₂的最优拟合模型为指数模型,其R²为0.367和0.482;与CO的最优拟合模型为对数模型,其拟合优度R²为0.810。该结果为分析大气气溶胶污染来源以及治理提供了数据。     

基于傅里叶级数的中国沿海地区Tm模型精化研究

本文采用中国沿海地区13个探空站2010~2014年实测地表温度T_s与平均温度T_m数据，利用傅里叶级数分析法精化中国沿海地区T_m模型，并将2015年探空站实测T_m数据与精化模型进行对比检验。结果表明，精化模型在T_m探测方面具有更高的计算精度，其计算大气可降水量的误差概率分布趋近于正态分布，具有较强的稳定性。     

Research on the Application of Fast-steering Mirror in Stellar Interferometers

In stellar interferometers, the fast-steering mirror (FSM) is widely utilized to correct the wavefront tilt caused by the atmospheric turbulence and internal instrumental vibration, because of its high resolution and fast response frequency. In this study, the non-coplanar error between the FSM and the actuator deflection axis introduced by the manufacturing, assembly, and adjustment is analyzed systematically. Via a numerical method, the additional optical path difference (OPD) caused by the above factors is studied, and its effect on the fringe tracking accuracy of a stellar interferometer is also discussed. On the other hand, the starlight parallelism between the beams of two arms is one of the main factors for the loss of fringe visibility. By analyzing the influence of wavefront tilt caused by the atmospheric turbulence on fringe visibility, a simple and efficient real-time correction scheme of starlight parallelism is proposed based on a single array detector. The feasibility of this scheme is demonstrated by a laboratory experiment. The results show that after the correction of fast-steering mirror, the starlight parallelism meets preliminarily the requirement of a stellar interferometer on the wavefront tilt.     

A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

资源三号卫星影像纠正的方法研究

影像的应用前提是影像处理,大气校正可消除大气和光照等因素对地物发射的影响。在此基础上,介绍几种常用的几何纠正方法,可消除系统和非系统因素引起的影像几何变形。本文通过对资源三号卫星的基本参数信息和相对应影像数据特点的介绍,先通过大气校正,校正后的影像分别使用几何纠正的几种方法,并通过各种方法的计算量、实用性以及相应的精度,对比分析各种方法在处理这种数据时的优越性。     

青岛台体应变短周期气压系数变化原因探讨

青岛台体应变短周期(小于128 min)气压系数2018-01出现阶变，通过对观测系统、台站周边施工情况、监测环境等逐项现场核实，排除观测系统、周边施工的影响。利用离散小波变换和回归分析发现，钻孔水位的气压系数与体应变气压系数同步阶变，结合台站钻孔施工当天体应变钻孔水位变化、体应变趋势变化、其他相邻台站水位气压系数变化等数据认为，台站钻孔施工是导致体应变气压系数变化的原因，并定性分析其变化机理。